background image

Copying Functions 

OPERATION GUIDE

4-21

4

Cover Mode

Add a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thick 
paper fed from the different paper source than the regular one. The following two options are available. Paper 
for the cover is supplied from the multi purpose tray.
To feed the cover paper from the cassette, refer to 

Paper Source for Cover Paper on page 8-10

.

The procedure for using Cover mode copying is explained below.

1

Press the 

Copy

 key.

2

Place the originals on the platen.

3

Press [Layout/Edit] and then [Cover].

4

Press [Front Cover] or [Front and Back Covers].

5

Press [OK].

6

Press the 

Start

 key. Copying begins.

If the originals are placed on the platen, 
consecutively replace each original after pressing 
the 

Start

 key.

After scanning all originals, press [Finish Scan] to 
start copying.

Type of Cover

Description

Front Cover

First page of the originals is copied on a different 
paper.

Front and Back 
Covers

First page and last page of the originals are 
copied on different paper.

Status

08/08/2009    10:10

Ready to copy.

Copies

Cancel

OK

Cover

Add Shortcut

Print cover pages on the different type of
paper, using a different paper source.
Select either [Front Cover] or
[Front and Back Covers].
*Set paper source for cover in System Menu.

Front and Back
Covers

Off

Front Cover

Original
Zoom
Paper

:
:
:

---

---

100%

Preview

Place original.

Содержание DC 2242









































































































































































































































































































































































































































Отзывы: