Triumph Adler DC 2216 Скачать руководство пользователя страница 10

Страница: 10 / 148

viii

OPERATION GUIDE

Caution Labels

Labels related to safety have been attached to the product in the locations
shown below. Please observe the warnings to prevent accidents such as
burns and electrical shock while clearing paper misfeeds and adding toner.

Note: Do not remove any of these labels.

Label1

High voltage generated in this
section. There is a risk of getting
shocked so do not touch
anything in this section.

Label3

High voltage generated in this
section. There is a risk of getting
shocked so do not touch anything in
this section.

Label2

High temperature inside this section.
There is the risk of being burned so do not
touch anything within.

Label4

High temperature in the upper part of this
section. There is the risk of being burned so
do not touch anything within.

Label5

Sections identified by this label operate at
high temperatures. There is the risk of being
burned so do not touch anything within.

Содержание DC 2216





















































































































































Результаты поиска

Содержание DC 2216

Отзывы:

Triumph Adler DC 2216, Инструкция по эксплуатации, Страница: 10 / 148

Результаты поиска

Содержание DC 2216

Отзывы: