Triumph Adler DC 2025 Скачать руководство пользователя страница 80

Страница: 80 / 139

CHAPTER 6 FUNCTIONS

6-6

Touch the [# of copy correct] key.
The “Amend the number of copy” screen will appear.

Select the ID code to be altered, and then touch the [Cor-
rection] key.
The Correction screen will appear.

Enter a new limit with the numeric key.
Limits are set in units of 100’s, up to maximum of 999,000.

NOTE

• Entering “0” enables unlimited copying.
• Touch the [Back] key to display the “Amend the number of copy”

screen. Touch the [Correction] key, and then re-enter the maxi-
mum number of copies.

• To alter the copy limit of another department, repeat steps 2 to

Touch the [Close] key.
The “Management code menu” screen will appear.

Touch the [On] key below “Copy”, and then touch the
[Close] key.
The selected management code is turned ON, and then
the display will return to the “Default setting menu” screen.

•

Altering limits

Alter limits for the copies of respective departments without de-
leting or re-registering the ID codes.

Display the “Management code menu” screen. (See (2)
How to display the “Management code menu” screen.)

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Inch specifications

Metric specifications

Содержание DC 2025












































































































































Результаты поиска

Содержание DC 2025

Отзывы:

Triumph Adler DC 2025, Инструкция по эксплуатации, Страница: 80 / 139

Результаты поиска

Содержание DC 2025

Отзывы: