Triumph Adler DC 2018, Инструкция по эксплуатации

Страница: 92 / 144

Using EWS (Embedded Web Server)
8-6 ADVANCED OPERATION GUIDE
Basic Page
This section includes settings that apply to the machine, such as Device Defaults,
Security, and basic Networking. If the Admin password has been set, pages in this
section are available only to the Administrator.
Setting the Administrator password is highly recommended. See the Security section
for other security options. Function specific settings are found under their respective
sections.
Basic > Security > Account Settings
The Administrator (Admin) account is the master access account. It controls access
to the printer and networking configuration from all setup and management utilities
including the HTML web pages.
The factory default for EWS has no password. Setting the Admin password is highly
recommended to prevent unauthorized changes to the machine and networking
configuration.
To change the password:
1
Enter the Old Password .
2
Enter the password you want to set in New Password . This can be up to 30
character long.
3
Enter the same password in Confirm New Password .
4
Click the Submit button.
Basic > Security > Device
EWS provides the ability to restrict the type of access that can be accomplished from
the operation panel. This can be done by selecting one of the available settings:
Lock, Partial Lock, or Unlock.
• Network access to the machine can be restricted using IP address
designations and/or SNMP settings.
• Network access to the machine can be restricted to allow only specific network
addresses. Refer to
Advanced > Protocols > TCP/IP > IP Filters on page 8-19 .
• The SNMP Read and Write Community settings function as passwords to
control read and write access to the machine using SNMP. Refer to
Advanced
> Management > SNMP on page 8-25 .
Item Description
Lock Prohibits use of System Menu/Counter and prohibits canceling of jobs from the
Status Menu.
Partial Lock Prohibits use of System Menu/Counter .
Unlock The operation panel is fully operable.