Triton Bar Mixer Shower With Diverter, Инструкция по установке и эксплуатации

Страница: 10 / 24

Bar mixer shower
8
PREPARING THE MIXER VALVE
Check the contents to make sure all parts are
present.
Before starting the mixer installation, make
sure all the openings on the valve are carefully
covered to stop ingress of any debris etc., while
routing the supply pipework.
The shower valve is suitable for exposed
installation onto solid wall, a stud partition wall,
dry lined wall or fixing to a laminate cubicle or
panel.
SITING OF THE SHOWER AND
ACCESSORIES
Refer to fig.5 for correct siting of the shower.
The mixer valve should be positioned, as
detailed, with all controls within comfortable
reach of the user.
The handset can be positioned above or to either
side of the shower.
INSTALL BAR MIXER BRACKETS
Guidance on installing the bar mixer brackets
(fig.6) can be found in a separate instruction
book (supplied).
Please read the instructions carefully.
Read through the whole of this guide before
beginning installation.
The wall brackets installation must be carried
out by a suitably competent person and in the
sequence of the instruction book.
Fig.5
Fig.6
Diagrammatic view - not to scale
Consideration
must be given
for adequate
ceiling space
Shower-
head can be
positioned
either side
of the rail.
Height of the
showerhead
to suit user’s
requirement.