Triton Systems ©
10
terminal phone setup
1. On the power supply, press the power switch to the ON (1) position to power up the ATM.
2. Log into the Management Functions program. Navigate to
Management Functions > Terminal Configuration >
Communication > Protocol.
**Note**
The host processor will provide the information for the following options on the
Communication
menu.
3. Select
Protocol.
This option selects the communication protocol and your host processor’s requirement the
terminal will use, dial-up, TCP/IP, wireless, or other forms of communications.
4. Use the
Up
or
Down
button to highlight either TDL or TDL w/o EOT. Press the
Select
button to check the box.
Press the
Save and Return
button.
5. Select
Message Format
. This option specifies the content and structure of the message that passes between the
terminal and the host processor during a transaction.
6. Use the
Up
or
Down
button to highlight TDL. Press the
Select
button to check the box. Press the
Save and
Return
button.
