Power shower
14
Note:
If adjustment of the maximum
temperature stop is required, refer to section
’Adjusting the maximum temperature stop’
.
Replace the temperature control onto the valve
spindle. Make sure the pointer aligns with
setting ‘9’ on the temperature disc
(fig.28)
.
Secure with the retaining screw and fit the cover
trim.
Switch on the electricity supply at the isolating
switch. Make sure both water supplies are still
turned on.
Once the installation of the riser rail is complete,
the shower is ready for normal operation.
Retaining
screw
Maximum
temperature
stop
Flow
control
Temperature
disc
Temperature
control
Cover
trim
Fig.28
Fig.27
WARNING
COVER RETAINING SCREWS
ONLY
the
SUPPLIED SCREWS
should be
used. The use of none supplied screws
WILL
invalidate product specifications & warranty.
