Triton Aquasensation AS2000, Инструкция по установке и эксплуатации

Страница: 23 / 29

Sprayplate
key
Sprayplate
A
Q U A S E N S A T I O N
A S 2 0 0 0 T / A S 2 0 0 0
20
CLEANING
It is recommended that the shower unit, riser rail,
hose etc. be cleaned using a soft cloth and that
the use of abrasive or solvent cleaning fluids be
avoided.
IT IS IMPORTANT TO KEEP THE SPRAYHEAD
CLEAN TO MAINTAIN THE PERFORMANCE OF THE
SHOWER. The hardness of the water will
determine the frequency of cleaning. For example,
if the shower is used every day in a very hard
water area, it may be necessary to clean the
sprayhead on a weekly basis.
Sprayplate removal
There is no need to remove the sprayhead from
the hose.
Using the removal tool supplied (fig.51) , locate
the three raised ’bosses’ into the three recesses in
the sprayplate. Hold in firmly and twist anti-
clockwise
(fig.52) . This movement may turn the
cartridge assembly as well until it reaches a ‘stop’.
Hold the cartridge firmly and continue to twist
anti-clockwise. Having loosened the sprayplate
sufficiently, it can be unscrewed and removed
completely
(fig.53) .
Clean the sprayplate with a suitable brush or
preferably leave it to soak overnight in a mild
proprietary descalent. Ensure all traces of scale are
removed and thoroughly rinse in clean water
afterwards.
Before replacing the sprayplate, it is advisable to
direct the hose and sprayhead to waste, and start
the shower to flush out any loose scale deposits.
Stop the shower after approximately thirty
seconds.
Refit the sprayplate by screwing clockwise. Use
the tool to screw the sprayplate tight.
Fig.53
Fig.52
Fig.51
WARNING
Do not
use ‘powerful’ abrasive or solvent
cleaning fluids when cleaning the shower as
they may damage the plastic fittings