Triton 2181403E, Руководство пользователя

Страница: 13 / 24

Bar mixer shower
11
RISER KIT INSTALLATION
Making sure the tapered part of the seal is at the
bottom, slide the diverter collar and rubber seal
over the base of the riser rail assembly and fit into
the outlet of the diverter
(fig.13) .
Carefully locate the rail holder into the wall
bracket
(fig.14) . Ensure the riser rail is vertical
and there is no strain on the seal in the outlet of
the diverter.
Secure in place by tightening the grub screw in
the bracket.
Tighten the diverter collar.
FITTING THE HOSE AND SHOWER
HEAD
Screw one end of the flexible hose to the bottom
outlet connector on the diverter valve, making
sure that the sealing washer is in place and
screw the other end of the hose to the shower
head
(fig.15) . Locate the shower head into the
shower head holder.
Important: It is the conical end of the hose
which grips into the holder. The shower head will
not fit in the holder without the hose attached.
Screw the fixed head to the riser/fixed head rail.
Make sure the sealing washer is in place and
screw tight to seal the joint.
Fig.13
Fig.14
Fig.15
Grub screw
Washers
Showerhead