- - XM464-V1.2-NR
１３
1. Select
“VER”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, The display will show “V-XX”, "XX" stands for the version number, such as the display
may also show,"V-2.0","V-9.9"etc.
3. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Main menu 2
1.
Press
[MODE/ESC]
to enter the main menu (display flashing).
2.
Press
[UP]
or
[DOWN]
button to select
“ADJU”
.
- Lamp adjustment
With this function you can adjust the lamp via the Control Board. The shutter opens and the lamp can be
adjusted. In this mode, the device will not react to any control signal.
1. Select
“LADJ”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3.
Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
select “OFF”
if
you don’t.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Test function of each channel
With this function you can test each channel on its (correct) function.
1. Select
“TEST”
by pressing
[UP]
button.
2. Press
[ENTER]
, the display shows
“T-XX”
, “X” stands for the channel number.
3. The current channel will be tested.
4. Select the desired channel by pressing
[UP]
or
[DOWN]
button.
5. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
-
Fixture code and motor fix
1. Select
“WHEL”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“CODE”
or
“CH01-CH30”
.
4. Select
“CODE”
or
“CH01-CH30”
by pressing
[UP]
or
[DOWN]
button.
5. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Main menu 3
1.
Press
[MODE/ESC]
to enter the main menu (display flashing).
2. Press
[UP]
or
[DOWN]
button to select
“TIME”
.
