- - XM464-V1.2-NR
１２
-
Pan degree select
With this function you can select pan angle 630or 540
0.
1. Select
“DEGR”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“540”
or
“630”
.
3. Press
[UP]
to select
“540”
or press
[DOWN]
button to
select
“630”
.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Mic sensitivity
With this function you can adjust the sensitivity of the microphone.
1. Select “MIC” by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows “
M-XX
”, “
XX
” stands for the number from 0 to 70.
3. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select “AUTO” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “CLOS”, “HOLD”, “AUTO” or “AUDI”.
3. Press
[UP]
or
[DOWN]
button to select “CLOS”, “HOLD”, “AUTO” or “AUDI”, the default is “HOLD”.
4. Press
[ENTER
] to confirm or Press
[MODE/ESC]
to return to the main menu.
- Fan’s mode select
With this function you can select the Fan’s mode.
1. Select “FANS” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “HIGH”
，
“AUTO” or “LOW”.
3. Press
[UP]
or
[DOWN]
button to select “HIGH”
，
“AUTO” or “LOW”, the default is “AUTO”.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Reset
With this function you can reset the device via the Control Board.
1. Select
“REST”
by pressing
[UP]
or
[DOWN]
button.
1.
Press
[ENTER]
to reset or Press
[MODE/ESC]
to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values (shaded). Any edited scenes will be lost.
1. Select
“LODA”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you
don’t.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
——“
HIBE
”
Stand by mode
The lamp and step motors will be power off if the fixture stay without DMX signal for 15 mins (Factory
default).And the fixture will be reset before working once it receive DMX signal again.
1. Select
“HIBE”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“15M”
.
3. Press
[UP]
or
[DOWN]
button
, the display shows
“
01M
”
，
“
02M
”
….
“
99M
”
or
“
OFF
”
.
4. Press
[ENTER]
to confirm or Press
[MODE/ESC]
to return to the main menu.
- Software version
With this function you can display the software version of the device.
