XM787-V1.0.0-NR
10
8. Control Board
The Control Board offers several features: you can simply set the starting address , run the
pre-programmed program or make a reset.
The main menu is accessed by pressing the
-button until the display starts flashing.
Browse through the menu by pressing the
-button ,
-button ,
-button or
-button. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing the the
-button ,
-button ,
-button or
-button.
Confirm every selection by pressing the
-button. You can leave every mode by pressing the
-button. The functions provided are described in the following sections. it will exit from
flash 10 seconds after the last keypress. Press this key under edit mode, . The functions provided
are described in the following sections.
To access the display menu via the internal battery, press the DC switch button for
2seconds; To shut off the display immediately, choose the commend " Reset All" menu and
press "Enter" button, otherwise, the display will automatically switch off about 1
minute from last button press.
Fu
nc
ti
on
Set Dmx Address
Dmx Value
Slave Mode
Auto Program
Sound Control
A001~AXXX
ALL……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone
DMX address setting
DMX value display
Slave setting
Auto program
Music control
In
fo
rm
at
io
n
Time Information.
Current Time
Total Run TIme
Last Run Time
Timer Password
Clean Last Run
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
Password=XXX
ON/OFF
Power on running time
Fixture running time
Fixture Last times clear
Timer Password
038
Clear Fixture Last time
Temperature. Info Head Temperature.
XXX /
Temperature in the head
Software Ver
V1.0.0……
Software version
Pe
rs
on
al
it
y
Status Settings
Address Via DMX
No DMX Status
Pan Reverse
Tilt Reverse
Pan Degree
Feedback
Movement Speed
Mic Sensitivity.
Hibernation
ON/OFF
Close/Hold/Auto/Music
ON/OFF
ON/OFF
630/540
ON/OFF
Speed 1~ 4
0~99%
OFF, 01M~99M
，
15M
Add. via DMX
Auto run if no DMX
Pan Reverse movement
Tilt Reverse movement
Pan Degree Select
Movement Feedback
Movement Mode Select
Sensitivity of Mic.
Stand by Mode
Service Setting
Password
RDM PID
Password=XXX
XXXXXX
Service Password“=050”
RDM PID Code
Fans Control
10%
30%
50%
Fans Speed select
