Triton Blue SIRIUS 14 LED 3W RGB, Руководство пользователя

Страница: 23 / 23

User Manual | SIRIUS 14 LED 3W RGB 3 IN 1 IP 65 | Triton Blue | Rev.Jan. 2014 | www.triton-blue.com
MODE CHANNEL VALUE FUNCTION
HSV 1 0-255 RED
2 0-255 GREEN
3 0-255 BLUE
MODE CHANNEL VALUE FUNCTION
ARC.1 1 0-255 RED
2 0-255 GREEN
3 0-255 BLUE
AR1.d 1 0-255 DIMMER
2 0-255 RED
3 0-255 GREEN
4 0-255 BLUE
AR1.s 1 0-255 DIMMER
2 0-255 RED
3 0-255 GREEN
4 0-255 BLUE
5 0--255 STROBE
DMX Primer
There are 512 channels in a DMX-512 connection. Channels may be assigned in any
manner. A fixture
capable of receiving DMX 512 will require one or a number of sequential channels. The user must assign a
starting address on the fixture that indicates the first
channel reserved in the controller. There are many
different types of DMX controllable fixtures and they all may vary in the total number of channels required.
Choosing a start address should be planned in advance. Channels should never overlap. if they do, this
will
r
esult in erratic operation of the fixtures whose starting address is set incorrectly. You can however,
control multiple fixtures of the same type using the same starting address as long as the intended result is
that of unison movement or operation, in other words, the fixtures will be slaved together and all respond
exactly the same.
DMX fixtures are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is
where the DATA OUT of one fixture connects to the DATA IN of the next
fixture. The order in which the
fixtures are connected is not important and has no effect on how a controller communicates to each fixture.
Use an order that provides for the easiest and most direct cabling. Connect fixtures using shielded two
conductor twisted pair cable
with three pin XLR male to female connectors. The shield connection is pin 1,
while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+).