TriStar BL-4009, Инструкция по эксплуатации

Страница: 11 / 22

Before plugging in

Make sure your electricity supply is the same as the one shown on the underside of
the power unit.
Before using for the first time

Remove all packaging including the plastic blade covers from the knife blade. These
covers should be discarded as they are to protect the blade during manufacture and
transport only.

Wash the parts: see “cleaning”.
To use the food chopper
o
Place the non slip mat onto the work-surface, rib upside down.
o
Position the bowl onto the middle of the non slip mat.
o
Fit the knife blade over the pin in the bowl.
o
Add your food, see processing guide.

Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
 Don‟t chop hard foods such as coffee beans, ice cubes, spices or
chocolate-
you‟ll damage the blade.
o
Fit the splashguard. Make sure the slots in the splashguard fit over the
handles in the rim of the bowl.

The super chopper will not operate unless the splashguard in fitted in the right
position.
o
Fit the power unit.
o
The power unit will only fit correctly in two positions.
o
Plug in. press down on the power unit for short lengths of time to produce a
pulsing action-this will avoid over processing the ingredients.
o
If the appliance is overloaded, remove some of the mixture and continue
processing in several batches.
o
Stop the appliance and scrape down if necessary.
o
Do not run the chopper continuously for longer than 10 seconds. Leave to
cool for 1 minute in between each 10 seconds operation.
o
After use. Unplug and dismantle.
Cleaning

Always switch off and unplug before cleaning.

Handle the cutting blade with care as they are extremely sharp.

Some food will discolor
. It won‟t harm the plastic or affect the flavor of your food.