Personal Fireplace Heater™
5
Operating Instructions
1.
Place the Unit on a flat, stable surface. Plug the Power Cord into a
power outlet.
2.
Press “I” on the Power Switch (located at the lower back corner on
the Unit) to power the Unit on. Then, press the Remote Power Button.
3.
Set the desired temperature: Use the Temperature/Timer Display
Button to cycle to the temperature setting. Then, use the Time/
Temperature Increase or Decrease Buttons to select your desired
temperature.
NOTE:
To enable the Unit’s heating function, set the Unit’s
temperature above the ambient temperature. The Unit will start
heating up and blowing hot air. After the desired temperature is set,
the display reverts to showing the ambient temperature.
4.
Set the timer: If you are using the Unit’s timer function, use the
Temperature/Timer Display Button to cycle to the timer setting. Use
the Time/Temperature Increase or Decrease Buttons to set the timer.
NOTE:
The Unit will continue to operate if the timer is set to 0.
Manually turn the Unit off when it is not in use.
5.
Press the Fireplace Effect Button to display or hide the visual
fireplace effect.
•
Temperature setting range: 59–95° F.
•
Timer setting range: 0–8 hours. By
default, the timer displays “
0H
,” which
indicates that the timer is inactive. The
timer can be increased or decreased in
1-hour increments.
•
During use, the Unit may turn on
or off depending on the difference
between the ambient temperature
and set temperature. When the
ambient temperature rises above
the set temperature, the Unit will
automatically stop heating (the fan
continues blowing for 15 seconds
before stopping completely). When the
ambient temperature falls below the set
temperature, the Unit will automatically
start heating and blowing hot air again.
•
If the Remote Power Button is used
to deactivate the Unit while the Unit is
heating and blowing hot air, the fan will
continue to blow for 15 seconds before
stopping completely. The Display will
show a 15-second countdown until the
fan has powered off. The Unit will still be
on but will not produce heat.
•
If the Unit Power Switch is used to turn
off the Unit, the fan will stop blowing
immediately.
Additional Information
