7
USING YOUR STEAM STATION
The appliance has two ironing ways. You can use dry ironing or steam ironing, the details
refer to the following:
Dry ironing
1. Put the unit base on a stable and level surface and then put the iron on the thermal
insulation stand of unit base.
2. Connect the appliance with power source and press down the power button, the power
indicator turns on.
3. Turn temperature dial to your desired setting, which is depended on the fabric of garment.
The iron starts heating, and the temperature indicator will illuminate solidly during heating.
Refer to
“IRONING TIPS”
and
“ADDITIONAL TABLE”
as below when select
temperature.
4. The temperature indicator will turn off when the selected temperature is reached. You can
start ironing now.
WARNING: Never touch hot soleplate at any time before cooling down!
Steam ironing
1. Put the unit base on a stable and level surface.
2. Grasp the water tank’s handle to remove the water tank, then fill it with water through the
filling aperture. You had better use purified water with less calcium particles. After it, replace
the water tank properly. The max capacity of water tank is 1.7L, the water level shall not be
exceeded the MAX mark.
3. Put the iron on the thermal insulation stand of unit base.
4. Connect the appliance with power source, press down the power button, and the defaulted
low steam rate indicator will blink. And there are three modes including low, medium and
high steam rate available, you can select the desired steam rate for each garment according to
your requirement. Make sure that there is enough water in the tank.
5. Turn temperature dial to your desired setting, which is depended on the fabric of garment.
The iron starts heating, and the temperature indicator will illuminate solidly during heating.
Refer to
“IRONING TIPS”
and
“ADDITIONAL TABLE”
as below when select
