7
Features
continued
Cord Retention Bracket:
Provides secure attachment points for
connected equipment cords.
Mounting Brackets:
Use these brackets to mount the PDU .
SNMP Reset Button:
Press the reset button
A
for 3 seconds to
reboot the PDU's network card. Rebooting the network card will
not erase network settings or interrupt AC power.
Factory Port:
The port is reserved for configuration by factory
authorized personnel only. Do not connect anything to the port.
PS/2 Port:
Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Contact Tripp Lite Customer
Support at (773) 869-1234 for ordering information. Note: Do not
connect a keyboard or mouse to this port.
Mini-DIN Serial Port:
Use this port to provide a direct terminal
connection to a computer with a terminal emulation program. A
serial cable (part number 73-1025) is included with the PDU. If
you need to order a replacement cable, contact Tripp Lite
Customer Support at (773) 869-1234.
Ethernet Port:
Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
A
and Status LED
B
indicate several operating conditions, as shown
in the table below.
This port is not compatible with PoE (Power
Over Ethernet) applications.
Network Operating Conditions
A
Link LED Color
Off
No Network Connection
Flashing Amber
100 Mbps Network Connection
Flashing Green
10 Mbps Network Connection
B
Status LED Color
Off
Card Not Initialized
Steady Green
Card Initialized and Operational
Flashing Amber
Error - Card Not Initialized
A
B
A
200912032 93-2721.indd 7
12/17/2009 11:03:17 AM
