2
Installation
Before proceeding to install the SRCOOLTPDUCT, first make sure the air conditioning unit is correctly
installed per the instructions shown in the SRCOOL3KTP Owner’s Manual.
The air duct assembly is installed on the air outlet side of the condenser of the top-mounted air conditioner to duct hot air
to the outdoors or into a dedicated hot air return.
The air duct assembly consists of three main parts: air duct, clamp, and air duct adapter.
To install the air duct assembly:
1. Remove the 8 screw plugs around the top fan of the
top-mounted air conditioner unit.
2. Use the supplied 8 M6x16 combination screws to
attach the sheet metal air duct to the top-mounted air
conditioner unit.
3. Place one end of the air duct on the outside of the
sheet metal air duct and secure with a hose clamp.
4. Connect the other end of the air duct where the hot air
can be properly discharged.
5. Check for air leaks after installation and adjust as
needed.
Note:
The hose can be trimmed to a shorter length depending
on your application.
Air Duct
Clamp
Sheet Metal Air Duct
M6 x 16 Combination Screw (x8)
SRCOOL3KTP
AC Unit
Compressed State
Stretched State
10 in. [252 mm]
14 in. [356 mm]
14 in. [356 mm]
197 in. [5000 mm]
