background image

1

Owner’s Manual

SMX1500LCD 

Digital UPS System

Series Number: AGSM5510

Not suitable for mobile applications.

Español 8 • Français 15 • 

Русский 

22 • Deutsch 29

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2019 Tripp Lite. All rights reserved.

Important Safety Instructions

SAVE THESE INSTRUCTIONS

The manual contains instructions and warnings that should be followed during the installation, operation and storage of this product. 

Failure to heed these warnings will void your warranty.

UPS Location Warnings

•  The UPS is designed for indoor use only in a controlled environment, 

away from excess moisture, temperature extremes, conductive 

contaminants, dust or direct sunlight.

•  For best performance, maintain an indoor temperature between 0º C 

and 40º C.

•  Leave adequate space around all sides of the UPS for proper 

ventilation.

•  Do not mount unit with its front or rear panel facing down (at any 

angle). Mounting in this manner will seriously inhibit the unit’s internal 

cooling, eventually causing product damage not covered under 
warranty.

UPS Connection Warnings

•  Connect the UPS directly to a properly grounded AC power outlet. Do 

not plug the UPS into itself; this will damage the UPS.

•  Do not modify the UPS plug, and do not use an adapter that 

eliminates the UPS ground connection.

•  Do not use extension cords to connect the UPS to an AC outlet. 
•  If the UPS receives power from a motor-driven AC generator, the 

generator must provide clean, filtered, computer-grade output.

•  The mains outlet supplying power to the UPS should be near the UPS 

and easily accessible.

•  To remove the UPS from the supply mains, the AC plug serves as a 

disconnect device. 

Equipment Connection Warnings

•  Use of this equipment in life support applications where failure of this 

equipment can reasonably be expected to cause the failure of the life 

support equipment or to significantly affect its safety or effectiveness 
is not recommended. 

•  Do not connect surge protectors or extension cords to the output of 

the UPS. This might damage the UPS and will void the surge protector 
and UPS warranties.

Battery Warnings

•  The UPS does not require routine maintenance. Do not open the UPS 

for any reason. There are no user-serviceable parts inside.

•  Batteries can present a risk of electrical shock and burn from high 

short-circuit current. Observe proper precautions. Do not dispose of 
the batteries in a fire. Do not open the UPS or batteries. Do not short 
or bridge the battery terminals with any object. Unplug and  

turn off the UPS before performing battery replacement. Use tools 

with insulated handles. There are no user-serviceable parts inside  
the UPS. Battery replacement should be performed only by  

authorized service personnel using the same number and type of 
batteries (Sealed Lead-Acid). The batteries are recyclable.  

Refer to your local codes for disposal requirements or visit  

http://www.tripplite.com/support/recycling-program for recycling 
information. Tripp Lite offers a complete line of UPS System 

Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at 
http://www.tripplite.com/products/battery-finder/ to locate the specific 

replacement battery for your UPS.

• Do not attempt to add external batteries to the UPS.

Содержание SMX1500LCD





































Отзывы: