4
Mounting (Rack)
continued
Connect the two segments of each shelf
A
using the
included screws and nuts
B
. Leave the screws slightly
loose so that the shelves can be adjusted in the next step.
Adjust each shelf to fit your rack, then mount them in the
lowest available space of your rack with the screws, nuts
and washers provided
C
. Note that the support ledges
should face inward. Tighten the screws that connect the
shelf segments
B
.
Attach the mounting ears
D
to the front mounting holes
of your equipment
E
using the screws provided
F
. The
ears should face forward.
Using an assistant, lift your equipment and slide it onto
the mounting shelves. Attach your equipment to the rack
by inserting the appropriate hardware
G
through the
mounting ears and into the rack rails.
1
2
3
A
B
C
B
E
D
F
G
1
2
3
4
4
4-Post Mounting
(Included with 2U and 3U models. Optional for 4U models.)
If you want to mount a 4U model UPS in a 4-post rack, a Tripp Lite 4-Post Rackmount Installation Kit
(model: UPSRMRII, sold separately) will be required.
201203014 93-2757.indd 4
3/15/2012 5:03:39 PM
