Built-in UPS output receptacles
Hardwire
Output AC waveform (AC mode)
Sine wave
Output AC waveform (battery mode)
Pure Sine wave
INPUT
Rated input current (at maximum
load)
24A
Nominal Input Voltage(s) Supported
110V AC; 120V AC
UPS input connection type
Hardwire
Recommended Electrical Service
30A 120V (L-N-G)
Phase
Single-Phase
BATTERY
Full load runtime (minutes)
12 min. (2400w)
Half load runtime (minutes)
30 min. (1200w)
Expandable battery runtime
Supports extended runtime with optional external battery packs
External battery pack compatibility
BP72V15-2U
(limit 1);
BP72V28RT-3U
(multi-pack compatible);
BP72V18-2US
(multi-pack compatible)
DC system voltage (VDC)
72
Battery recharge rate (included
batteries)
Less than 6 hours from 10% to 80%
Replacement battery cartridge
(internal UPS battery replacement)
RBC96-3U
(quantity 2)
Battery Access
Front panel battery access door
Battery replacement description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation description
Online, double-conversion power conditioning
Overvoltage correction
2% output voltage regulation during overvoltages to 150
Undervoltage correction
2% output voltage regulation during undervoltages to 80
Severe undervoltage correction
2% output voltage regulation during undervoltages to 65 (under 70% load only)
LEDS ALARMS & SWITCHES
LED Indicators
14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery
and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in
rack/tower formats
Alarms
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
3 / 6
