UPS input connection
type
L5-30P
UPS Input cord length
(ft.)
8
UPS Input cord length
(m)
2.4
Recommended
Electrical Service
30A 120V
Input cord length (m)
2.4
BATTERY
Full load runtime
(minutes)
7 min. (2400w)
Half load runtime
(minutes)
23 min. (1200w)
External battery pack
compatibility
BP24V28-2U
(limit 1);
BP24V70-3U
(multi-pack compatible)
DC system voltage
(VDC)
24
Battery recharge rate
(included batteries)
Less than 9 hours from 10% to 90%
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 87 to 140
Overvoltage correction
Input voltages between 127 and 140 are reduced by 12%
Undervoltage correction
Input voltages between 95 and 105 are boosted by 10%
Severe undervoltage
correction
Input voltages between 87 and 94 are boosted by 22%
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; set of 4 rear-panel switches control
system enable and contact closure port inverter shutoff commands
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
Tower
Primary form factor
Tower
