4
Push the start button on the top
of your Surge Suppressor.
Once you’ve done this, the
LED will illuminate red and
power will flow to your attached device.
NOTE:
The On / Off button can turn off the unit any
time during operation.
5
Once the countdown timer reaches zero, your Surge
Suppressor will power down and the LED will turn
off.
NOTE:
When sitting idle the Surge Suppressor
uses no power.
Quick Setup Guide
Quick Setup Guide
Product Features
Troubleshooting
Specifications
NOTE:
You can change your
countdown time setting at
any time during operation.
• Timer selection switch (1, 3 or 6 hours):
Helps make connected devices more energy efficient
• On / Off push button
• Red LED indicator lights when Surge Suppressor
is active
• Standard 3-pin power outlet compliant
• Does not obstruct the lower outlet of a standard 3-pin
power outlet when plugged into the top outlet
• Low power consumption operation saves energy
• 350-joule surge protection
When using the Surge Suppressor,
my device does not fully charge.
Make sure you have selected an appropriate time period
for the device you are trying to charge by referring to
step 3 of the Quick Setup Guide, or simply increase the
time period selected on the Surge Suppressor.
• Continuous Duty Electrical Rating:
120V~
/
15A /60Hz/1800W
• Standby Power Consumption: 0.75W
• Surge Protection:
1) Voltage Protective Rating: 400V
2) Max. Surge Voltage: 6000V
3) Max. Spike Current: 6500A
4) Response Timer: <1 nanosecond
Safety Information
• Important: Use indoors in a dry location.
• Contains no user-serviceable parts; do not open.
12-12-080 93-327D
12-12-080.indd 2
3/4/2013 12:17:29 PM
