OverPower inverter output supports longer duration overloads to 150% for up to 15 seconds in duration under ideal battery and temperature
conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to
provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
3 stage, 6 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
NEMA 5-15R output receptacle passes 120V line power or inverter output through to connected equipment
Ultra-compact, lightweight aluminum housing with secure mounting flanges weighs only 4 lbs./1.8 kg
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to
maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings.
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Adjustable brownout response enables user configuration of automatic transfer to battery mode from 85 to 105V AC
Resettable 7A output circuit breaker and cooling fan protect the inverter from load and temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Specifications
OVERVIEW
Intended Application
Emergency Home Power & Portable Power
OUTPUT
Frequency
compatibility
60 Hz
Output watts
700
Continuous output
capacity (watts)
700
Peak output capacity
(watts)
1400
Output nominal
voltage
120V
Output voltage
regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection
Includes 7A output breaker for AC output loads
Outlet quantity / type
1 NEMA 5-15R
INPUT
Nominal Input
Voltage(s) Supported
120V AC
Recommended
Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A
120V AC recommended
Maximum input
amps / watts
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8.4 amps at 120VAC with full inverter and charger load
(1.4A max charger-only)
Input connection type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
Voltage compatibility
(VAC)
120
Voltage compatibility
(VDC)
12
BATTERY
