4
Installation
3.
Verify the transceiver module is locked into
place by trying to remove it from the module
socket without releasing the latch. If it stays
in place, it is seated properly. If not, you will
need to re-insert it, firmly pressing on the
dust plug until it locks into place.
4.
Once you have verified the transceiver
module is securely locked in place, remove
the dust plug from the RJ45 port and
connect your cabling.
Note:
Save the dust plug so it can be used in
the event the transceiver module needs to be
uninstalled and reinstalled.
16-09-099-9335FB-EN.indd 4
9/12/2016 10:02:49 AM
