FCC Part 68 Notice (United States Only)
If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily
discontinue your service. If possible, they will notify you in advance. If advance notice isn't practical, you will be
notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone
company may make changes in its facilities, equipment, operations or procedures that could affect the proper
operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain
uninterrupted service. If you experience trouble with this equipment's Modem/Fax Protection, please call Tripp
Lite Technical Support at (773) 869-1234 for repair/warranty information. The telephone company may ask you to
disconnect this equipment from the network until the problem has been corrected or you are sure the equipment
is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This
equipment may not be used on coin service provided by the telephone company. Connection to party lines is
subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)
Lifetime Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for its lifetime. If the product should prove defective in material or workmanship
within that period, Seller will repair or replace the product, in its sole discretion. Service under this Warranty can
only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp
Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return shipping charges The warranties of all TRIPP
LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The
warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its
output receptacles.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE
WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ALL IMPLIED WARRANTIES, INCLUDING ALLWARRANTIES OF MERCHANTABILITY OR FITNESS,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY
EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow
limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty
gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction.) TRIPP
LITE; 1111 35th St.; Chicago, IL 60609
WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific
application.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been
assigned a unique series number. The series number can be found on the product nameplate label, along with
all required approval markings and information. When requesting compliance information for this product, always
refer to the series number. The series number should not be confused with the marking name or model number of
the product.
Ultimate Lifetime Insurance Policy
(This is a limited warranty valid in the U.S. and Canada only.)
Tripp Lite warrants, for the lifetime of the product, (at Tripp Lite's option) to repair or replace (on a pro rata basis)
directly connected equipment that is damaged due to power transients while properly connected to Tripp Lite
products offering the Ultimate Lifetime Insurance Policy. Power transients include spikes and surges on the AC
power, data or telephone lines that the Tripp Lite products have been designed to protect against (as recognized
by industry standards). The following four paragraphs are conditions that must be complied with before the
warranty becomes valid; failure to comply with these requirements will void the warranty.
AC Power Line Transients: To claim damages, the Tripp Lite product must be plugged into a properly wired and
grounded outlet. No extension cords or other electrical connections may be used. The installation must comply
with all applicable electrical and safety codes set forth by the National Electrical Code (NEC). Except as provided
above, this warranty does not cover any damage to properly connected electronic equipment resulting from a
cause other than an "AC power transient". If user meets all of the above requirements, Tripp Lite will repair or
replace (at Tripp Lite's option) equipment up to the specified value (See Ultimate Lifetime Insurance Policy Limits).
No coverage is allowed for damage entering from telephone or data lines, unless they are separately protected,
as described below.
Telephone and Data Line Transients: Tripp Lite will repair or replace directly connected equipment that is
damaged by transients on telephone and/or data lines only when all such paths are protected by a Tripp Lite
protection product(s) and the AC power (utility) line is simultaneously protected by a Tripp Lite power protection
device (UPS, surge suppressor or line conditioner) with Ultimate Lifetime Insurance coverage. Additional
telephone and/or data line connected devices downstream must have their own telephone and/or dataline
protectors.
Reimbursement dollar limits will be equal to that of the Tripp Lite power protection protector. Coverage is excluded
where a suitable environment for the protection device is not provided, including, but not limited to, lack of a
proper safety ground. Telephone service equipment must also include a properly installed and operating "primary
protection" device at the telephone service entrance (such devices are normally added during telephone line
installation).
All above warranties are null and void if the Tripp Lite product has been improperly installed, tampered with or
altered in any way, or if the connected equipment was not used under normal operating conditions or in
accordance with any labels or instructions. All claims under this warranty must be submitted in writing to Tripp
Lite within 30 days of the occurrence or the claim will not be considered. This warranty does not include damage
resulting from accident or misuse, and applies to the domestic (USA & Canada) use of these products only. Tripp
Lite reserves the right to determine whether the damage to the connected equipment is due to malfunction of the
Tripp Lite product by requesting the equipment in question be sent to Tripp Lite for examination. This policy is
above and beyond, only to the extent needed, of that provided by any coverage of connected equipment provided
by other sources, including, but not limited to, any manufacturer's warranty and/or any extended warranties.
EXCEPT AS PROVIDED ABOVE, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE
LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT
OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically,
Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment,
loss of software, loss of data, costs of substitutes, claims by third parties or otherwise. Coverage also does not
apply to connected medical and industrial equipment.
To receive service under this warranty, you must be the original purchaser/user of the product in question. You
must obtain a Returned Material Authorization (RMA) number from Tripp Lite. Products must be returned to Tripp
Lite with transportation charges prepaid and must be accompanied by a brief description of the problem
encountered and proof of date and place of purchase.
Copyright © 2006. All rights reserved. Isobar
®
is a registered trademark of Tripp Lite.
All copyrights are the property of their respective owners.
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
Troubleshooting
Before calling Tripp Lite for technical assistance, try the possible solutions to common problems listed below. If you still require assistance, call Tripp Lite Customer Service
at (773) 869-1234.
Problem
No AC output power available at
outlets.
IR outlets do not turn on or off in
sequence properly.
Included IR remote does not control
the IR outlets.
Possible Solutions
Check Connections:
Ensure the power cord is properly connected to a live 120V AC wall outlet.
Check Outlet Status:
Ensure that you haven't inadvertently turned the IR outlets off using the Power Conditioning Center’s
switches or a remote.
Reset Circuit Breaker:
Reduce equipment load by unplugging some devices. Press the circuit breaker in to restore power.
Reset the Power Conditioning Center:
Use the Power Switch to turn the Power Conditioning Center off and then on to reset.
Clear Access to IR Sensor:
Ensure the remote is pointed directly (with no obstruction) at the IR sensor located on the front panel
of the Power Conditioning Center.
Reprogram Included IR Remote:
The included remote is preprogrammed, but may need to be reprogrammed if it does not
control the IR outlets properly.
• STEP 1: Press and hold the “ENTER” button located on the front panel of the Power Conditioning Center for at least 5
seconds (the “OUTLET SELECT” LEDs will rapidly flash to indicate the interval has passed). The Power Conditioning
Center will be in Learning Mode.
Note: you will have 15 seconds to complete STEP 2; otherwise, the Power Conditioning Center will revert back to Normal Mode, and you will need to start the
progamming process over.
• STEP 2: Point the included IR remote at the IR sensor located on the front panel of the Power Conditioning
Center. Momentarily press any of the number buttons on the remote (1, 2, 3 or 4), and then press the remote’s “ENTER”
button. If the programming procedure is successful, the Power Conditioning Center's “OUTLET SELECT” LEDs will rapidly
flash.
The remote is now reprogrammed and ready for use.
200605132 93-2557 HT7300PC OM V2.qxd 10/26/2006 3:27 PM Page 4
