Instruction manual with warranty information
Features
HTR15-2U Pure Sine Wave UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage
conditions
1500VA/1200W power handling capacity compatible with control systems, high-definition sources, Audio/Video editing suites, digital
consoles, DVD/music/PCs/servers, RAIDs, media centers, PVRs/DVRs, boardrooms, digital processors/EFX, racks and other sensitive
electronics
Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other
UPS types
Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values
2 switchable load banks (2 outlets each) enable remote outlet management for load shedding or remote reboot of individual devices from
anywhere in the world
Single-line tel/DSL/Ethernet surge suppression
Internal battery set offers 18 min. runtime at half load (600W) and 8 min. at full load (1200W)
Optional BP48V60RT3U external battery pack increases runtime to 155 min. at half load (600W) and 72 minutes at full load (1200W);
multi-pack compatible
Optional BP48V24-2U external battery pack increases runtime to 75 min. at half load (600W) and 34 min. at full load (1200W); limit 1
Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure
and requires maintenance
Compact rackmount form factor installs in 2 rack spaces (2U) with a maximum installed depth of only 19 in.
Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X
and Linux
PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email
notification, event logging and running user-defined script commands
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required
$250,000
Ultimate Lifetime Insurance
(USA and Canada Only)
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
1500
Output Watt
Capacity (watts)
1200
Nominal Output
Voltage(s) Supported
100V; 110V; 120V
Frequency
compatibility
50/60 Hz (auto-selectable)
Frequency
compatibility details
Output frequency matches input nominal on startup
Output voltage
regulation (line
mode)
+/- 2%
Built-in UPS output
receptacles
6 5-15R outlet(s)
Built-in controllable
switched load banks
Two controllable 5-15R load banks (bank 1 - two outlets, bank 2 - four outlets)
INPUT
Rated input current
(at maximum load)
12A
