4
1. Assemble the Base
2. Adjust Column Height
• Insert the right leg into the base. Align the holes in the right leg to the
holes in the base. Secure with the screws. Repeat this step for the left
leg.
• Each caster can be adjusted independently for fine tuning.
Slightly turn the nut to lower or raise the base.
Repeat this step for the left column.
Note:
Make sure both columns are at the same height using the height indicator as guide.
Adjust to the desired height,
then tighten all screws.
CAUTION: Hold the inner column
when loosening the screws to
adjust height.
Never Overtighten
Screws
Middle Base
Left Leg
M6x16
Hex Key
Right Leg
Wrench
Caster
Hex Key
Hex Key
Right Column