EXO Visual Inc
+1 833 733 7427 V3.1
www.exovisual.com
ezPoster Quick Start Guide
1.
Setting up
1.1.
Free Standing: Place the device on a flat floor, fully Pull out the kick stand
1.2.
Set up with upright base stand
1.2.1, Set up the upright standing base. Bolt 3 screws on each side of the base plate from the
bottom. Be aware of different position of screws for single or double-sided installations. Screws
(and/or screwdriver) provided.
1.2.2, Assemble the toolless billets onto the ezPoster if the billets are not pre-installed.
1.2.3, Set the LED display(monitor) on the stand so it sits in top and bottom billets. (Better to
have 2 people handle it even though one person is doable).
Single-side installation position
Double-side installation position
