2
Package Contents
Product Features
•
B140-002-DD Extender / Splitter Transmitter Unit
•
External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
•
Mounting Hardware
•
Owner’s Manual
•
Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two
sets of Dual Displays
•
A B140-Series remote receiver is needed at each monitor
•
For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to
extend a 1920 x 1080 @ 60Hz signal up to 150 ft. from the transmitter
(or a 1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter)
•
For shorter distances: Use a B140-1P0 or B140-1P0-WP passive receiver
to extend a 1920 x 1080 @ 60Hz signal up to 50 ft. from the transmitter
(or a 1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter)
•
Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series,
to achieve maximum distance and resolution
•
Further expand the range and number of monitors by adding B140-110
remote repeater units
•
Add up to three repeaters on each of the B140-002-DD channels, for a
total of 4 displays per channel (An active receiver should be the last unit in
a channel)
•
A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. for each repeater
added into a channel (or up to 175 ft. for a 1024 x 768 @ 60Hz signal)
•
DVI 1.0 compliant
•
HDCP compatible
•
Mounting hardware included that allows the unit to be wall-mounted,
rackmounted, or pole mounted
•
Plug and play; no software or drivers required
•
Compatible with all operating systems
•
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule
purchases
13-01-085-933287_revA.indd 2
1/30/2013 3:44:15 PM
