8
The extender kit provides the following functional controls:
•
USB 1.1
– One Micro-USB input at transmitter, dual USB-A
outputs at receiver
•
Bi-Directional IR
– Dual 3.5 mm jacks at both the transmitter
and receiver
•
Toslink
– Audio output at receiver
Note:
All of the following USB/IR/Toslink steps are optional. For port
locations, refer to the diagram in the
Extender Kit Installation
section.
IR Control
1. Connect a user-supplied IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect a user-supplied IR-IN cable to the
receiver unit’s IR-IN port. The IR-IN cable will communicate
the desired command via the transmitter’s IR-OUT cable.
Note:
The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).
USB/IR/Toslink Controls
20-08-367 93-3D19.indb 8
20-08-367 93-3D19.indb 8
3/3/2021 3:25:48 PM
3/3/2021 3:25:48 PM
