4
Cascaded Installation
Note:
The maximum distances referenced in these instructions have been
tested at a video resolution of 1080p (60Hz) with 36-bit Deep Color (12 bits per
channel) using 28 AWG HDMI cables. Longer distances between the splitter and
connected monitors are achievable using 24 AWG HDMI cables and/or a source
set to display a lower video resolution.
1.
Make sure the power to all devices you will be connecting is turned
off.
2.
Connect the HDMI source to the Input port on the first level splitter.
Note:
The length of the HDMI cable connecting the source to the splitter
must not exceed 13 ft. (4 m).
3.
Connect an available Output port on the first level splitter to the
HDMI input port on a second level splitter.
Note:
The length of the HDMI cable connecting the first and second level
splitters must not exceed 16 ft. (5 m).
4.
Repeat Step 3 for each additional splitter you wish to add (no more
than six levels of splitters).
5.
Connect an available Output port to the display’s HDMI input port.
Note:
The length of the HDMI cable connecting the splitter to the display
must not exceed 16 ft. (5 m).
6.
Repeat Step 5 for the remaining
Output
ports in the installation.
7.
Connect the included power supply to each splitter, then plug
into a Tripp Lite Surge Protector, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS).
8.
Turn on the power to the HDMI source and displays.
16-03-383-933591-EN.indd 4
4/4/2016 11:39:06 AM
