5
Note:
Use standard size Cat5e, Cat6 or Cat6a cables that feature a
wire gauge of 23/24 AWG. Slim category cables are not supported.
1.
Remove both the cap
A
and end nut
E
from one of the
metric cable glands (refer to section
Metric Cable Gland
Assembly
). Slide the cap and remaining portion of the
metric cable gland onto both the included grounding wire
and bare-wire category cable coming from your source (ex:
PoE switch) as shown:
Note:
Use standard size Cat5e, Cat6 or Cat6a cabling that features
a wire gauge of 23/24 AWG. Slim category cables are not supported.
Installation
PoE Camera
Equipment (Edge) Protection Only
This installation protects only your edge equipment from
surge, lightning or ESD damage. To protect both the source
and edge equipment, refer to section
Source and Equipment
(Edge) Protection.
19-11-220-933B57-BOOK.indb 5
19-11-220-933B57-BOOK.indb 5
2/5/2020 1:28:51 PM
2/5/2020 1:28:51 PM
