Tripp Lite 037332225436, Руководство пользователя

Страница: 7 / 356

7
3. Installation and Setup
3.1 Unpacking and Inspection
Unpack the unit and inspect its contents. Packaging may include additional accessories and components, depending on specific customer
orders.
• One (1) UPS
• One (1) Owner’s Manual
• One (1) RS-232 Cable
• One (1) paralleling cable for every set of UPS units being paralleled: P100200KIT
Other Accessory or Component Options Available Upon Request
• One (1) Battery Charger Temperature Compensation Thermostat: TEMPC100200
Note: Do not turn on the unit. Make sure to inspect the unit prior to installation. Ensure nothing inside the package was damaged during transportation.
Notify the carrier and dealer immediately if there is any damage or missing parts. Please keep the original packaging in a safe place for future use.
1. Use a forklift to move the product to the installed area. Make sure the bearing capacity of forklift is sufficient. Refer to Figure 3.1.
2. Follow the unpacking order in Figure 3.2 to remove carton (
1
,
2
) and foams (
3
).
3. Remove two fixing plates located on the two sides of the unit (
1
,
2
and
3
) in Figure 3.3. Loosen leveling feet (
4
) by rotating them
counterclockwise. Once loosened, move the cabinet from the pallet.
4. To fix the cabinet into position, simply rotate leveling feet clockwise. Refer to Figure 3.4.
S3M100KX, S3M100KXD and S3M120KX, S3M120KXD Models
Figure 3.1A
Figure 3.4A Figure 3.5A
Figure 3.2A Figure 3.3A
1125 mm
1175 mm
705 mm
1
2
3
4
4
3
1
2
3