Password Setup
6.6.5 Disk Write Mode
- Setup Hard Disk
Disk Overwrite
Disk Write Mode
Disk Initialize Now
YES
Press Enter
ON
ON
<Warming>
All Recording will be erased
Are you sure ?
Disk Overwrite : Select overwrite permission
when Hard Disk is full .
ON: Overwrite Hard Disk from oldest data .
OFF: When Hard Disk full. Stop recording and
Buzzer activate (refer to menu 6.3 buzzer
setup .
Disk Initialize Now : Refreshment Hard Disk all
recorded data deleted .
When select disk initialize, alarm message
showing select Yes to start disk initialize .
When change disk overwrite ON/OFF mode , the change will be applied from change time.
For example : When overwrite on mode & HDD full, change to overwrite off mode and then
it will be applied new data fill HDD full after change time .
6.6.6 System Information
- Product information (vision etc)
S/W Version
System Information
H/W Version
0.0.1.2
0.0.0.2
Video Signal Type
Disk Size
Number of HDD
IP Address
MAC Address
PAL
40GB / 79GB
1 HDD
291.192.141.22
00-11-5F-00-00-43
S/W Version: Indicate software version of the
product .
H/W Version: Indicate hardware version of the
product .
Video Signal Type: Indicate video signal type
Disk Size: Indicate hard disk capacity .
Number of HDD: Indicate present installed HDD
Number .
IP Address
MAC Address
6.6.7 System Information
- Every Setup Initializing
Factory Default
Factor y Default
YES
Press Enter
ON
<Warming>
System configuration will be initialized
Press Enter to start initialize .
Showing warning message and press OK to run
Initialize .
If do factory default, every setup is initialized ,
but saving image is not erased .
33
