28/65
[STATIC TYPE]
[STATIC TYPE] – Press [
◄
,
►
]
button to select [STATIC]
IP ADDRESS: If you select IP TYPE as STATIC, you can input the IP ADDRESS yourself. Use [
◄
,
►
]
button to move desired position, then press [
▲
,
▼
] button to change a number.
GATEWAY: If you select IP TYPE as STATIC, you can input the GATEWAY yourself. Use [
◄
,
►
]
but-
ton to move desired position, then press [
▲
,
▼
] button to change a number.
NET MASK: If you select IP TYPE as STATIC, you can input the IP ADDRESS yourself. Use [
◄
,
►
]
button to move desired position, then press [
▲
,
▼
] button to change a number.
When you finish Set-up, press [MENU] button, to show [LOCAL IP]. Select [EXIT&SAVE CHANGE]
to finish Set-up after you move [EXIT].
▪ PORT: Set [PORT], in order to connect to DVR system through Network, the default port no is
[8841].
▪ MAC ADDRESS: The Mac Address is physical address made by manufacturer in order to using the
network. If you change the Mac Address, it may not connect with network.
▪ PASSWORD: You need the password when you contact to DVR system through network.
▪ NAME SERVER
The name server collects the changeable network situation.
You can connect with system through network using NAME SERVER.
Reference
DHCP or PPPOE TYPE that has static IP can be changed frequently. Therefore, when
you connect network by IP, an unexpected obstacle can be happened. In order to
avoid above problem, you better use Name which is registered on [DVR Name]
