2/65
GENERAL SAFETY AND PRECAUTIONS
This model is manufactured to safety international safety standard. Review
the following safety precaution to avoid injury and prevent damage to the
DVR or any products connected to it.
1. Use a proper power source.
Do not operate this product from a power source that applies more
than the specified voltage (90~260 VAC).
2. Never insert metallic material into the DVR case.
This can cause
electric shock.
3. Do not operate in wet & dusty condition. Keep product surfaces clean
and dry.
Avoid placing the DVR in areas like a damp basement or a dusty hall-
way.
4. Do not expose this product to rain or use near water.
If the product gets wet, unplug it and contact an authorized dealer
immediately.
5. To clean the outside case of the DVR, use a lightly dampened cloth
(no solvents).
6. The DVR generates heat during operation. Place the DVR in a well
ventilated area. The DVR has a built in fan to properly ventilate the system.
Do not block air bent holes (bottom, upper, sides and back) of the DVR
case.
7 Do not operate with suspected failures. If there are any unusual
sounds or smells coming from the DVR, unplug it immediately and contact
an authorized dealer or service center.
