•
Please take care not to plug the cable test jack into a PoE
source or .damage may occur!
• Do not expose tester to extremes in temperature or high humidity.
NOTE: Before testing the PC network, you should first set up the
corresponding Ethernet card attributes, turn off the "energy-saving
Ethernet circuit" “Flow control” and then perform the test, otherwise it
will affect the test results. Please note that this is very important! ! !The
setting method is as follows:
[Settings]
—
[Network & Internet]
—
[Ethernet]
—
[Change adapter options]
—
[Right mouse button local connection]
—
[Properties]
—
[Configuration]
—
[Advanced]
—
[Energy-saving Ethernet]
—
[OFF]
—
[Flow control]
—
[OFF]
—
[OK]
INTERNATIONAL SAFETY SYMBOLS
Potential danger. Indicates the user must refer to the manual for important
safety information.
Indicates hazardous voltages may be present.
Equipment is protected by double or reinforced insulation.
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the
user must refer to the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal
use, hazardous voltages may be present
Caution Symbol (No PoE)
Double Insulation
