Press and hold the
SET
button for 3 seconds to enter or exit the
Setup mode. When the thermometer is in Setup mode, the
display shows the
SETUP
display icon.
Set Type J or K thermocouple
1.
Press
▲
or
▼
to scroll to the “TYPE” setting (shown on the bottom left
of the display).
2.
Press
ENTER
to choose the option.
3.
Press
▼
to toggle between J and K.
4.
Press and hold the
SET
button for 3 seconds to save the setting and
return to normal mode.
Set Sleep/Non-sleep mode
The thermometer enters sleep mode by default. The meter will
automatically shut off after 20 minutes of inactivity (no buttons pressed).
When the thermometer is in Setup mode, the display shows the SETUP
display icon
.
1.
Press
▲
or
▼
to scroll to the
SLP
setting.
2.
Press
ENTER
to choose the option;
On
or
OFF
will appear in the
display.
3.
Use the arrow key
▼
to select ON or OFF.
4.
Press
ENTER
to store the new setting.
5.
Press and hold the
SET
button for 3 seconds to return to normal
mode.
Set Offset
Use the offset option in Setup (
T1
menu item) to adjust the
thermometer’s readings to compensate for known temperature offset at
a specific temperature. The adjustment range is ± 5.0°C or ± 9.0 °F.
1.
Plug the thermocouple into the input connector.
