CamView HD Pro User Manual
17
www.Triplett.com
4.3 Reviewing and Accessing Snapshots and Videos
4.3.1 Overview
As discussed earlier, the Tester can take snapshots of or record input from video, then save the
files to internal storage as either .jpg or .avi files.
NOTE — Overlaid test details are not saved on
the image.
4.3.2 Reviewing the Saved Files
While on the Main Menu, highlight “Record Playback” (press the
MODE
button to enter the
Main Menu if you are not already on it; press the
Up or Down Arrow Keys
to highlight it). Once
the “Record Playback” option is highlighted, press the
Right Arrow Key
to access the file folders.
Follow the On-Screen Instructions to Delete, Play, Pause, and navigate the files.
4.3.3 Accessing the Saved Files from a Computer
To copy the saved files off the Tester, plug the USB cable into the side of the Tester and connect
the other end to your computer. Then, on the Main Menu, highlight and select “Settings”, then
select “Start USB Storage”. The Tester’s internal memory card will appear on your computer as an
external hard drive. Once you have completed copying and deleting files from your Tester, select
EJECT MEDIA to undock it from your computer.
NOTES — Due to data sharing problems, the USB storage function is off by default. When using
USB Storage, do not press
MODE
or the power key as doing so will cause the USB storage device
to be unplugged from the host computer, and you may lose data. To disconnect the USB connection
from a computer, eject or unmount the disk from the host system before disconnecting the cable.
WARNING
Failure to properly Eject/Undock the Tester from your computer can damage the
Flash Storage drive that is built into the Tester.
