Triplett CableRater Скачать руководство пользователя страница 27

27

Triplett One Year Limited Warranty

Triplett / Jewell Instruments warrants instruments and test equipment manufactured
by  it  to  be  free  from  defective  material  or  workmanship  and  agrees  to  repair  or
replace such products which, under normal use and service, disclose the defect to
be  the  fault  of  our  manufacturing,  with  no  charge  within  one  year  of  the  date  of
original  purchase  for  parts  and  labor.    If  we  are  unable  to  repair  or  replace  the
product, we will make a refund of the purchase price.  Consult the Instruction Manual
for  instructions  regarding  the  proper  use  and  servicing  of  instruments  and  test
equipment.  Our obligation under this warranty is limited to repairing, replacing, or
making refund on any instrument or test equipment which proves to be defective
within one year from the date of original purchase.

This warranty does not apply to any of our products which have been repaired or
altered by unauthorized persons in any way so as, in our sole judgment, to injure
their  stability  or  reliability,  or  which  have  been  subject  to  misuse,  abuse,
misapplication, negligence, accident or which have had the serial numbers altered,
defaced,  or  removed.    Accessories,  including  batteries  and  fuses,  not  of  our
manufacture used with this product are not covered by this warranty.

To register a claim under the provisions of this warranty, contact Triplett / Jewell
Instruments’ Customer Service Department for a Return Authorization Number (RMA)
and  return  instructions.    No  returned  product  will  be  accepted  without  an  RMA
number. Upon our inspection of the product, we will advise you as to the disposition
of your claim.

ALL WARRANTIES IMPLIED BY LAW ARE HEREBY LIMITED TO A PERIOD OF
ONE  YEAR  FROM  DATE  OF  PURCHASE,  AND  THE  PROVISIONS  OF  THE
WARRANTY  ARE  EXPRESSLY  IN  LIEU  OF  ANY  OTHER  WARRANTIES
EXPRESSED OR IMPLIED.

The  purchaser  agrees  to  assume  all  liability  for  any  damages  and  bodily  injury
which  may  result  from  the  use  or  misuse    of  the  product  by  the  purchaser,  his
employees, or others, and the remedies provided for in this warranty are expressly
in lieu of any other liability Triplett / Jewell Instruments may have, including incidental
or consequential damages.

Some states (USA ONLY) do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
No representative of Triplett / Jewell Instruments or any other person is authorized
to extend the liability of Triplett / Jewell Instruments in connection with the sale of
its products beyond the terms hereof.

Triplett / Jewell Instruments reserves the right to discontinue models at any time, or
change  specifications,  price  or  design,  without  notice  and  without  incurring  any
obligation.

This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.

Содержание CableRater




























Отзывы: