to normal operation.
Note: The HOLD feature will activate when the Backlight is
turned on. Press the HOLD key again to exit Hold.
RANGE BUTTON
When the meter is first turned on, it automatically goes into
AutoRanging. This automatically selects the best range for the
measurements being made and is generally the best mode
for most measurements. For measurement situations requiring
that a range be manually selected, perform the following:
1.Press the RANGE button. The “Auto Range” display indicator
will turn off, The “Manual Range” display indicator will turn on
2.Press the RANGE button to step through the available ranges
until you select the range you want.
3.Press and hold the RANGE button for 2 seconds to
exit the ManualRanging mode and return to AutoRanging.
Backlight Button
The backlight function illuminates the display and is used
when the ambient light to too low to permit viewing of the
displayed readings. Press the button for two seconds to
turn the backlight on and press the button a second time to
turn the backlight off.
Battery Replacement
1.Remove the one rear Phillips head screw
2.Open the battery compartment
3.Replace the Requires One 9V battery
4.Re-assemble the meter
www.
GlobalTestSupply
.com
Find Quality Products Online at:
