40
7.12.2
Insert the black test lead banana plug into the negative
(-) jack (COM) and the red test lead banana plug into
the positive (+) jack
indicated as
on the “Front Panel”
drawing on page 22.
7.12.3
Touch the test probe tips to the circuit under test.
7.12.4
Read the frequency in the display. The digital reading
will indicate the proper value, if the frequency is below
2000Hz.
8: TEST LEAD HOLDERS STAND, and HANGER
Test Lead Holders are provided on the back of the 9007-A.
The test leads may be snapped into the back of the meter for
storage, or one or both leads may be snapped into the holders
with the tip protruding, forming a handy
‘meter
with
probe’
unit.
A built in stand can be flipped out to tilt the meter up to a
convenient angle for use on a table top.
A recess in the back of the meter allows it to be hung from a
hook or nail
www.
.com
1.800.561.8187
