Trio Motion Technology CAN 16-I/O Modules, Справочное руководство

Страница: 6 / 14

5-6 I/O Modules
Input/Output Modules
Trio Motion Technology
DIP Switch Settings
Note that the IO mapping of the PCI 208 starts at 32 rather than 16 which is
the usual setting for
Motion Coordinator ’s with 16 or fewer IO’s built-in.
TRIO Protocol
The switch marked PR is set ON to select the standard TRIO protocol.
The top 6 DIP switches on the CAN 16-I/O set the module address. Only
addresses 0 - 15 are valid for CAN 16-I/O modules.
The switch marked DR sets the CAN Bus communications rate to 125kHz or
500kHz. Only 500Khz is valid with the TRIO protocol.
Address: Start: End:
0 32 47
1 48 63
2
64 79
3
80 95
4 96 111
5 112 127
6 128 143
7 144 159
8 160 175
9 176 191
10 192 207
11 208 223
12 224 239
13
240 255
14
256 271
15 272 287