Trinnov Audio AMPLITUDE 8M, Руководство пользователя

Страница: 5 / 15

PLEASE CAREFULLY READ EACH ITEM OF THE OPERATING INSTRUCTIONS AND SAFETY
PRECAUTIONS BEFORE INSTALLING AND USING THIS PRODUCT. USE EXTRA CARE TO FOLLOW THE
WARNINGS WRITTEN ON THE PRODUCT ITSELF AND/OR IN THE OPERATING INSTRUCTIONS. KEEP
THE OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS FOR FUTURE REFERENCE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE ANY OF THE COVER
PANELS.
NO USER-SERVICEABLE PARTS INSIDE. REFER
ALL
SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
ALLOW LIQUIDS TO SPILL OR OBJECTS TO FALL
INTO ANY OPENINGS OF THE PRODUCT.
THIS UNIT IS SUPPLIED WITH A TWO 3 PIN
GROUNDED AC PLUGS. ALWAYS INSERT THE AC
PLUG INTO A GROUNDED OUTLET. DO NOT
REMOVE THE GROUND PIN OR DISABLE THE
GROUND FOR ANY PURPOSE.
BEFORE MAKING ANY CONNECTIONS TO THE
AMPLITUDE
8M
, FIRST TURN OFF THE POWER
AND THEN DISCONNECT THE AC POWER CORD.
WHEN INSTALLING THE AMPLITUDE 8M IN YOUR
SYSTEM, MAKE CERTAIN TO ALLOW A MINIMUM
OF ½ INCH OF VENTILATION ON EACH SIDE OF
THE UNIT. ALSO, ALLOW AT LEAST 3 INCHES OF
VENTILATION SPACE ABOVE THE UNIT.
IMPROPER VENTILATION OF THE UNIT MAY
CAUSE OVERHEATING, WHICH MAY DAMAGE
THE UNIT AND CAUSE A FIRE. PLACE THE UNIT
ON A SOLID SURFACE ONLY. I.E. NOT ON CARPET,
ETC.
DO NOT PLACE THE AMPLITUDE
8M
NEAR HEAT
SOURCES SUCH AS DIRECT SUNLIGHT, STOVES,
HEAT REGISTERS, RADIATORS OR OTHER HEAT
PRODUCING EQUIPMENT.
TO PREVENT DAMAGE TO THE ANALOG OUTPUT
CIRCUITRY, BE CERTAIN NOT TO SHORT THE
OUTPUT SIGNAL TO GROUND. ENSURE THAT
YOUR AUDIO OUTPUT CABLES DO NOT HAVE
ANY INTERNAL SHORTS BEFORE CONNECTING
THEM TO THE AMPLITUDE
8M
.
IF REPLACEMENT OF THE AC LINE FUSE AND/OR
ANY INTERNAL FUSE BECOMES NECESSARY,
REPLACE ONLY WITH SAME VALUE AND TYPE OF
FUSE. NEVER BYPASS THE FUSE.
IF THE AC CORD BECOMES DAMAGED, DO NOT
USE IT. IMMEDIATELY REPLACE IT WITH A NEW
ONE OF THE SAME OR BETTER RATING.
IT IS IMPERATIVE THAT THE AMPLITUDE 8M BE
OPERATED IN A WELL VENTILATED
ENVIRONMENT AND THE IMMEDIATE EXTERNAL
TEMPERATURE BE MAINTAINED AS SPECIFIED.
EXTERNAL COOLING FANS MAY BE REQUIRED IN
SOME CASES. DO NOT STACK ANY EQUIPMENT
DIRECTLY ABOVE OR BELOW THE AMPLITUDE
8M
AS TO PROTECT IT FROM OVERHEATING, AS
WELL AS THE CONTINUED FUNCTIONALITY OF
ANY
EQUIPMENT NEAR AND AROUND IT.
MAXIMUM
PERMISSIBLE OPERATING
CONDITIONS: 0°C TO 40°C (32°F – 104°F)°,
20-80%
RELATIVE HUMIDITY (WITHOUT
CONDENSATION).
AFTERMARKET and THIRD PARTY MODIFICATIONS
Please note that any aftermarket and/or third-party
modifications will void the warranty. In the case of
changing the feet on a unit, to prevent any damage
(which will also not be covered under warranty), please
verify that the screws being used to secure non-Trinnov
Audio feet do not screw any deeper into the chassis
than the original ones. The original screw is 1/4-20 by
1/2 and goes into the chassis 1/4 inch.
5