Trinnov Audio AMPLITUDE 8M, Руководство пользователя

Страница: 11 / 15

2. OPERATION
Before turning on the Amplitude
8m
, ensure that all precautions and warnings have been
carefully reviewed and adhered to. Damage to the Amplitude
8m
caused by improper operation,
wiring and/or ventilation will not be covered under warranty and Trinnov Audio will not be liable
for any consequential damage or loss.
When the amplifier is connected, the amp goes into Standby. The amplifier is completely off,
save for a minimal (and low power) supply to power the soft-start circuit. When the Standby
button is pressed, the soft-start sequence begins and the LED turns green. Several relay clicks
may be heard while the amplifier readies itself for operation. When the turn-on sequence is
complete the LED will illuminate blue and the amp will be fully on. Pressing the Standby button
again takes the amp directly into the
standby mode.
2.1 ENVIRONMENTAL NOTICE
Here are critical instructions to follow before you turn the power on your Amplitude
8m
:
I. It is imperative that the Amplitude 8m be connected to the ground via its three-wire AC
power cord. It is important that the AC power outlet, which the Amplitude 8m is plugged
into, is actually grounded. Failure to do so will severely compromise the performance,
reliability, and safety of use of the Amplitude
8m
.
II. Ventilation is an important issue when placing the Amplitude 8m in a system. Make
certain that the Amplitude
8m
is placed in a well-ventilated area or rack unit.
III. Please take note that some power line conditioners defeat the AC power ground on
their outlets. If the intention is to plug the Amplitude
8m into a line conditioner, check
with your dealer to make certain that the particular conditioner that is intended for use
DOES NOT DEFEAT THE AC GROUND on its AC outlets. Only the highest-powered line
conditioners should be considered for use with the Amplitude8m. Otherwise, the
amplifier’s power output may be compromised.
IV. DO NOT remove any cover panels from the Amplitude
8m
, as there are no user
serviceable components inside. Refer servicing and updating to qualified service
personnel only.
V. It is imperative that the Amplitude 8m be operated in a well-ventilated environment
and the immediate external temperature is maintained as specified in Appendix B of
this manual. External cooling fans may be required in some cases. Do not stack any
equipment directly above or below the Amplitude
8m , to protect it from overheating, as
well as the continued functionality of any equipment near and around it.
11