C
C
C
C
C
C
C
C
ASSEMBLY INSTRUCTIONS
F (2)
STEP 7
STEP 8
C (8)
I
Top: Hang the HANGING BRACKET (H) over the wire
strand in the middle of the TOP SHELF (B). Do the
same for the other side.
Bottom: Hang the HANGING BRACKET (H) over the lip
of SMALL SHELF (A). Do the same for the other side.
Fasten HANGING SCREW (I) through HANGING
BRACKET (H) to HANGING ROD (G). Do this for both
HANGING RODS (G).
Note: The organizer is able to fit closet widths
ranging from 56” to 78”. Please place towers in
position before expanding the HANGING ROD (G) and
attach to HANGING BRACKET (H) with HANGING
SCREW (I).
Place CLOSET ORGANIZER by the wall, drill 1
hole on each side of the wall at the same level
of TOP SHELF (B) where ANTI-TIPPING KIT (M)
is desired to be placed.
Fasten ANTI-TIPPING KIT (M) to the wall and
cable loop through TOP SHELF (B) as the image
shows, and close up the cable loop, connecting
CLOSET ORGANIZER to the wall via ANTI-
TIPPING KIT (M).
Place each BAMBOO BOARD (C) onto each
SMALL SHELF (A) as shown.
© 2021 TRINITY - 800.985.5506
5
G (2)
H (4)
I (4)
H
M (2)
G
