ASSEMBLY INSTRUCTIONS
F
J
K
F
F (4)
J (8)
K (4)
STEP 1
STEP 2
H (4)
A (1)
A (1)
Screw each LEVELER (K) into the bottom of
each BOTTOM POLE (F). Turn clock-wise to
screw in place.
Starting from the bottom of the BOTTOM
POLE (F), attach two pieces of black plastic
SLIP SLEEVES (J) on either side of the pole
in the desired groove. Slide the plastic SLIP
SLEEVES (J) down until they click into
position. Repeat for the other three poles.
Tip: Use the grooves on the pole as a guide
to ensure a level shelf height.
A
F
J
K
With the SMALL SHELF (A) on its side, slide
each of the BOTTOM POLES (F) through the
shelf collars.
Stand the unit upright and push down on
the SMALL SHELF (A). Using a rubber mallet
to lightly hammer the SMALL SHELF (A)
down over the collars is helpful but not
necessary.
Note: For stability, the lowest SMALL SHELF
(A) should be installed
no higher
than the
3rd indentation from the bottom of the
BOTTOM POLES (F).
F
F
F
© 2021 TRINITY - 800.985.5506
2
