SLM
102 – Operational Manual
TRINITY
[23]
2. In the above first row, Relay (
RL
) displays along with character ‘
R
’ blinking that
shows the Relay is selected for setting. Press
key that will start blinking
digit (i.e., 2). Set Relay by pressing
and
keys and press
key to
confirm the setting so that the blinking character will also return.
3. Press
key to set for Alarm Parameter that the character ‘
d
’ will start
blinking and press
key and set as steps above. While selecting the Alarm
parameters, LED indicator will glow such as above solid circled parameters
respectively.
4. Press key to set for second row that blinks ‘
V
'.
Press
key that the digit
start blinking. Set the Alarm Value such as steps above. Similalry set
Hysteresis also.
Setting Four Events, Event On, Event Value and Event Hysteresis
As previous Relays, unit has also four events which are individually field
programmable from 1 to 4. There are 16 Logs that can be stored for each event. So
that there are 64 logs for all four events. Each log stores event type and date-time of
event occurrence.
Event On
Same as “Alarm On”.
Event Value
Same as “Alarm Value”.
Event Hysteresis
Same as “Alarm Hysteresis”.
1. In the previous programmable parameter display, press
key till the next
display enters such as shown below.
