6
© 2008 TRINITY - 800.985.5506
USAGE INSTRUCTIONS
DRAWER REMOVAL
Pull the drawer out so that it is almost fully extended. Push the back release
lever DOWN on the RIGHT-hand side. Pull the black release lever UP on the
LEFT-hand side. While holding the levers as instructed, pull the drawer
forward until released from the slides attached to the Tool Chest (
“
Tool Chest
Slides
”
).
Note:
The slides attached to the drawer (
“
Drawer Slides
”
) are an
integral part of the drawer and must be removed along with the drawer itself.
DRAWER REPLACEMENT
Extend the Tool Chest Slides for the drawer to be replaced. Insert the
brackets on each side of the Drawer Slides into the corresponding slots on
the Tool Chest Slides, making sure they are properly positioned. Once the
brackets are inserted into the slots, completely close the drawer to set all
slides in their proper positions.
PULL UP
PUSH DOWN
